Motor maintenance motor shuttle coil (flat winding, vertical winding) winding machine

1、 Applicable scope

This machine has strong versatility and a wide range of applications. As long as different winding molds are exchanged on the flower tray, various shapes and voltage levels of coils can be wound, with a maximum prism length of 200mm

2、 Overall dimensions

L x W x H=900x700x1200

3、 Technical parameters

Center height: 680mm

Flower disc diameter: φ 400mm

Motor power and voltage: 380V 0.75kW variable speed motor with turbine reducer

4、 Structural characteristics

1. Adopting worm gear reducer, chain transmission, stepless speed regulation, high tension, simple structure, convenient use, safety and reliability.

2. Equipped with a digital display counter (0-9999) for accurate measurement of turns.

3. By using foot switches and directional switches, the speed can be adjusted arbitrarily according to the operator's proficiency level.

Motor shuttle coil (flat winding, vertical winding) winding machine

Suitable for flat wire winding and vertical winding of medium-sized and above motors. Equipped with an automated speed control system, the winding machine can pull a weight of over 400kg, with infinitely adjustable speed of 0-150 revolutions per minute. The circumference of the shuttle coil is pulled to about 2-3m, and the motor power is 0.75KW. The cycloidal needle wheel is used for speed reduction, with a single row chain transmission, equipped with a wire release frame and a simple tension braking device.

What method is used for the impregnation and drying of electric motors, and what tools and equipment are needed

What kind of paint should I choose, what kind of insulation paper should I choose, and what is the model?

(1) ; Alkyd baking paint can be used, with an infrared baking lamp of 250-500W and an iodine tungsten lamp (sun lamp) of 500-1000W. It can also be exposed to sunlight

(2) ; Alkyd self drying paint can be used, which does not require drying and cannot be baked. It is used in flammable and explosive environments

(3) ; Epoxy resin drying paint can be used, not for general motors

Insulation materials; (1) ; 0.15MM, 0.20MM, 0.25MM, 0.3MM white insulation paper, green shell insulation paper

(2) ; Yellow wax tubes can be purchased with different diameters, such as 1MM, 1.5MM, 2MM, 2.5MM, 4MM, 6MM, 8MM10MM, 12MM, 14MM, 16MM, 18MM, etc

(3) Bamboo slot stickers, available on the market, can also be made from dried bamboo. Motor maintenance